Lubinski Cigar Box European-Style Cedar Wood Paint Cigar Box Humidor Cigarette Case
- Cigar Humidor Construction
The interior is typically a veneer of Spanish cedar,a traditional material which possesses several desirable characteristics for cigar storage:
- It holds more moisture than most woods, so it helps maintain humidity.
- It is not prone to warping or cupping in high humidity.
- It imparts its aroma to cigars. For the same reason, some cigars are wrapped in Spanish-cedar sheets before they are sold.
- It can repel tobacco beetles, pinhead-sized pests which can ruin entire stocks of cigars by eating the tobacco and laying eggs, causing further infestation. They can also be discouraged by ensuring the humidor does not get hotter than 20 °C (68 °F).The beetle eggs usually only hatch at around 25 °C (77 °F), although there are also instances where they will hatch at cooler temperatures if the humidity is too high.
Some humidors contain a permanent humidifying system which keeps the air moist, which in turn keeps the cigars moist. Without a humidor, within 2 to 3 days, cigars will quickly lose moisture and level up with the general humidity around them.The ideal relative humidity in a humidor is around 68–72%. Though it can vary slightly depending on the cigar smoker's preferences, it should never go higher than 75% due to the possibility of hatching tobacco beetles. The more empty space, the more readily the humidity level of the box will fluctuate.
Most humidifying elements are passive, releasing stored humidity through evaporation and diffusion. The use of a 50/50 solution of propylene glycol and distilled water is recommended for replenishing the passive humidifying element, as it has a buffering effect on air humidity, maintaining it at approximately 70%.propylene glycol also has mild antifungal and antibacterial properties; distilled water should always be used, due to its lack of minerals, additives, or bacteria.
Electronic humidifiers are also available, although usually reserved for very large humidors. A sensor measures the outside humidity and then activates a ventilator, which blows air over a humid sponge or water tank into the humidor. Once the preset humidity level has been reached the ventilator stops. This way electronic humidifiers can maintain a much more stable humidity level than passive humidifiers. Also they typically will activate an alarm to notify when the moisture supply needs refilling, to prevent humidity drops. The accuracy of electronic humidifiers depends primarily on the integrated type of sensor; the capacitive type are preferred.
Silica gel beads, familiar for removing moisture from packaging containers, are a third alternative. These are "calibrated" with a coating of mineral salts to absorb or release humidity in various RH ranges (including 65%, 68%, 70%, and 72%), providing a buffering effect on relative humidity. They require only distilled water when necessary, and can be ruined by propylene glycol.
Most humidors contain a hygrometer which is a device that can measure the humidity of the environment. Whether analogue or digital, these hygrometers can be used to measure the levels of humidity inside the humidor.Regardless, digital hygrometers tend to be more accurate when compared to the analogue ones.
A humidor should never be exposed to direct sunlight. To discourage eggs of tobacco beetles from hatching and to prevent cigar rot, its internal temperature should be kept below 25 °C (77 °F), as well as below 75% relative humidity. At temperatures below 12 °C (54 °F), the desired ageing process of the cigars is impaired, making storage in wine cellars problematic.
- Items Info
【Capacity】 80-120 Cigars